Department of Mechanical Engineering (Faculty of Engineering and Technology)
Dr. Abid Haleem
( Department of Mechanical Engineering,
Faculty of Engineering and Technology,
Jamia Millia Islamia,
)
Doctor of Philosophy, (Ph D), from Department of Mechanical Engineering, Indian Institute of Technology Delhi, New Delhi, India.
Thesis topic:
"Steel Planning and Policy Evaluation: A Flexible Systems Management Approach".
Poition Held
Professor, Department of Mechanical Engineering, Faculty of Engineering and Technology, Jamia Millia Islamia, New Delhi, India.
Reader, Department of Mechanical Engineering, Faculty of Engineering and Technology, Jamia Millia Islamia, New Delhi, India.>
Lecturer, Department of Mechanical Engineering, Faculty of Engineering and Technology, Jamia Millia Islamia, New Delhi, India.
Lecturer, Department of Mechanical Engineering, Z H College of Engineering and Technology, Aligarh Muslim University, Aligarh, India
RESEARCH CONTRIBUTION: BOOKS, PAPERS AND ARTICLES PUBLISHED
Books Published:
Abid Haleemclass (2004), "Innovation, Flexibility and Technology Transfer", Tata Mc Graw Hill Publishing Co Ltd, New Delhi.
Contributed in: the following books:
Singhal, Basu & Shrivastawa (2006) "Emerging Trends in Technology Management", Published by GIFT Publishing, New Delhi.
Kiran Momaya and Sushil (2001)"Globalization, Flexibility and Competitiveness: A Technology Management Perspective", "Technology Management in the Indian Steel Industry: A Case Study of SAIL", Published by Vikas Publishing House, 291-284, New Delhi.2003
Sushil, (1996), "System Dynamics for Managers", Wiley Eastern Ltd, New Delhi.
Papers and Articles:
A Structural Model For E-Governance Delivery In Rural India, Research Conference one-government and e-governance in South Asia , June28-29 2006. Department of Management, Monash University, Melbourne, Australia (accepted)
"Business Dynamics-A Core and Alternative Technologies in Car Air-conditioning Sector Under Montreal Protocol: An Indian Perspective", Pranjana: The Journal of Management Awareness, New Delhi, Vol 7, No 1, Jan-Jun 2006
Bullwhip Effect: Effect On Supply Chain Performance", National Conference on Emerging Trends in Technology Management, Mathura, 2006, UP
"Technology Transfer and Acquisition: A Brief Review ", National Conference on Emerging Trends in Technology Management, Mathura, 2006, UP
"ERP: Implementation Status in Indian Small and Medium Enterprises", Advances in Mechanical Engineering, AIME- 2006, pp489-499,Ane Books India, New Delhi, India.
"Fire Side Erosion Control Techniques For Pulverized Coal Fired Boilers ", Advances in Mechanical Engineering, AIME- 2006, Ane Books India, New Delhi, India
"New Method Excess Air Estimation for Complete Combustion of Different Coal", 14th, ISME International Conference on Mechanical Engineering in Knowledge Age, 12-14 Dec 2005, page 759-764, Elite Publishing, New Delhi
"Environmental pressures, Culture, and Factors Contributing in the Usage of Various Categories of Application Software", Global Journal of Flexible Systems Management, 2005. Vol. 7, No 2, pp 31-45, New Delhi. India
"A Cross-impact Analysis of the External Situation and Culture on Factors of IT-enabled Business Transformation", Global Journal of Flexible Systems Management, 2005, Vol 6, No 1, pp 21-34 New Delhi. India
"Domestic Refrigerator Disposal: A Case Study of Delhi, India", Proceedings of the National Conference on Solid and Hazardous Waste Management Problems and Solutions, Pg 161-165, 28-29 April 2005, International Development Center Foundation, New Delhi
"Implications of Environmental and Cultural Factors on the Growth in Requirements of In-house Software Professionals", Indian Journal of Economics and Business, vol. 4, No 1, June 2005
"E Governance: Identifying Critical Success Factors", Pranjana: The Journal of Management Awareness, New Delhi, Vol8, No 2 Jan-July 2005
"Implementing Total Quality Management: A Case Study ", Flexibility in New Product Development, Business Systems and Knowledge Management, Prime Publication, ISBN: 81-8229-003-1 page 288-299 2004, New Delhi, India
"Taguchi Approach of Quality Management System: A Case Study", Pranjana: The Journal of Management Awareness, New Delhi, Vol 7, No 2 Jan-July 2004
"E Governance: Identifying Critical Success Factors", International Conference on Enhancing Global Business Competitiveness, Organized by Integrated Academy of Management and Technology, Nov 3-5, 2004, New Delhi, India
"Evaluation of Buyer Supplier Relations for Manufacturing and Service Industries in North India", Fortune Journal of International Management, Vol 1, No 1, April Sep 2004, page 97-110, New Delhi
"Role of Portal in E-Governance: The Indian Perspective", Productivity, vol. 44, no 4, Jan March, National Productivity Council New Delhi, 2004. India
"Analyzing Framework Affecting Buyer Supplier Relationship: An ANP Approach", International Journal of Supply Chain Management (**).
"Indian SME’s and Technology Transfer", Third Global Conference on Flexible Systems Management, Faculty of Engg. & Tech. Jamia Millia Islamia, New Delhi-110025. 13-15 March 2004, India.
"Development and Question of Technology Adoption". Technology Transfer innovation and Flexibility for Reshaping the World, Proceedings of the Third Global Conference on Flexible Systems Management, page 292-298, Tata Mc Graw Hill, New Delhi. India.
"Effective Management Techniques for Improvement of Condenser Vacuum", Third Global Conference on Flexible Systems Management, Faculty of Engg. & Tech. Jamia Millia Islamia, New Delhi-110025. 13-15 March 2004, India.
"Selection of Buyer-Supplier Relationship Framework in Supply Chain", Third Global Conference on Flexible Systems Management, Faculty of Engg. & Tech. Jamia Millia Islamia, New Delhi-110025. 13-15 March 2004, India.
"Prioritization of Factors directly involved in the Effective Selection of Buyer-supplier Relations", Third Global Conference on Flexible Systems Management, Faculty of Engg. & Tech. Jamia Millia Islamia, New Delhi-110025. 13-15 March 2004, India.
"Developing and Effective Web Site for E-Governance: The Indian Perspective", Third Global Conference on Flexible Systems Management, Faculty of Engg. & Tech. Jamia Millia Islamia, New Delhi-110025. 13-15 March 2004, India.
"Effective Management of Combustion Air to Improve Boiler Efficiency", (ICEE-SSD) International Conference on Energy and Environment Strategies for Sustainable Development, Department of Mechanical Engineering. Faculty of Engg. & Tech. Jamia Millia Islamia, New Delhi-110025. 23-24 January 2004, India.
"Alternative Options of Refrigerants for Indian Domestic Refrigerator Industries", (ICEE-SSD) International Conference on Energy and Environment Strategies for Sustainable Development, Department of Mechanical- Engg. Faculty of Engg. & Tech. Jamia Millia Islamia, New Delhi-110025, 23-24 January 2004, India.
"Environmental Sustainability through Active Noise Control: A Review", (ICEE-SSD) International Conference on Energy and Environment Strategies for Sustainable Development, Department of Mechanical- Engg. Faculty of Engg. & Tech. Jamia Millia Islamia, New Delhi-110025, 23-24 January 2004, India.
"Digital Divide and Digital Unity in E. -governance: Indian Perspective", ICEG2003, International Conference On E-Governance, Indian Institute of Technology Delhi, New Delhi. 18-20 December 2003, India
"Culture, Environmental Pressures, and the Factors for Successful Implementation of Business Process Engineering and Computer-based Information Systems", Global Journal of Flexible Systems Management, Vol 4, Nos. 1 and 2, pp 27-46, 2003. New Delhi. India
"E-Governance: Issues Involved", International Conference on Management of Research and Development, (ICMARD 2003). 10-11th January 2003, IIT Delhi, New Delhi.
"Draught System Management to Minimise the Loss of Life and Efficiency", National seminar on Maintenance and Troubleshooting of Boiler Auxiliaries, 20 & 21st February, 2003 at NPTI Badarpur, Delhi.
"Globalization of Research and Development: Software Sector in India", (ICMARD 2003) 10-11th January 2003, IIT Delhi, New Delhi.
"The Contribution of Information Technology to Critical Response Activities in Business Transformations", National Social Science Journal, Vol 20, #1, 2003 (ISSN: 0365-3346), USA
"Successful Implementation of Business Process Engineering and Computer Based Information Systems", Vol 20#2, National Social Science Journal, (ISSN: 0365-3346), USA. 2003.
"E-Government-- Initiatives and Challenges", Productivity, January March 200, Vol 43, No 4, Jan - March 2003, National Productivity Council, New Delhi, 2003
"E-Governance: An Emerging Paradigm", Vision: The Journal of Business Perspective, July- December, Vol.6, No. 2, .99-110, 2002-2003
"E-Government Initiatives and Challenges: An Indian Perspective", International Seminar on Business Education in New Millennium, Department of Commerce, Faculty of Commerce, Aligarh Muslim University, Aligarh, 2-3rd, March, 2003
"Information Technology: Growth and Adoption in Rural India", Information and Communication Technology for Development. www.developmentgateway.org, Development Gateway Foundation, USA, 2002
"Technology Management in the Indian Steel Industry: A Case Study of SAIL", Globalization, Flexibility and Competitiveness: A Technology Management Perspective, Published by Vikas Publishing House, 291-284, New Delhi, 2001
"Role of Information Technology in Business Transformation", (2002) VISION an International Journal from MDI, New Delhi.
"Supply Chain: Some Issues to Increase The Organizational Effectiveness", Proceedings of the International Conference on Logistics and Supply Chain Management, PSG College of Technology, Coimbatore, 116-124, India. 2001
"Job Shop Scheduling", Institution of Engineers, MACT, Bhopal, India. 2001
"Trends in Demand for Different Categories of Software and Human Resources", Proceedings of the Annual Conference of Midwest Decision Sciences Institute. Madison USA. April 2001
"Generation of Part Program and Profile Cutting on CNC Machines", Proceedings of the Indian National Conference on Application of Computers in Engineering and Communication, College of Engineering Osmanabad, C6: 1-5, March 24-25, 2001
"Role of Information Technology in Supply Chain Management", Proceedings of the Indian National Conference on Application of Computers in Engineering and Communication, College of Engineering Osmanabad, C1:1-6, March 24-25. 2001
"Introduction of CIM in Engineering Colleges Experimental Hurdles", Proceedings of the National World Class Manufacturing Conference, WCMS-2000, Bundelkhand Institute of Engineering and Technology, Jhansi, UP, 181-185, India. 2000
"Modeling for Waste Management Using Physical System Theory Approach", Environment Challenges of the New Millennium, 542-549, CAD PLAN, New Delhi. 1999
"Towards TQM Through Quality Circle", Proceedings of the All India Seminar on Recent Trends in Manufacturing System, Page no. 107-111, The Institution of Engineers, Regional Engineering Collage, Crusher, 1999
"Trade and Demand Analysis of the National Economy", Operations Management for Global Economy: Challenges and Prospects, (POMS-1999), Indian Institute of Technology Delhi, page 76-83, New Delhi, 1999.
"Developing Strategic Plan for Corporate 2000: Issue Involved", Trends in Mechanical Engineering Education and Research, Proceedings of the 11th ISME Conference on Mechanical Engineering, Department of Applied Mechanics I.I.T. Delhi, 273-280, New Delhi. 1999
"Modeling National Economy an Integrative Approach", Proceeding International Conference on Cognitive Systems 1998, NIIT, 866-875, New Delhi., 1998
"Technology Management in The Indian Steel Industry: A Case Study of SAIL ", Proceedings of International Conference on Management of Technology, ICMOT-1998, Indian Institute of Technology Delhi, New Delhi, 1998
"Indian Iron and Steel Industry Transition under Economic Reforms", Productivity, Oct-Dec 1998, 384-391, Vol. 39, No 3, New Delhi. 1998
"Intersectoral Modeling of Steel Industry", CAD CAM Robotics and Factories of the Future, pg 717-726, Narosa Publishers, New Delhi., 1996
"System Dynamics Model for Steel Planning at National Level", System Dynamics for Management Support, 325-334, Wiley Eastern Limited, New Delhi. INDIA, 1993
"Assembly Line Balancing: A Case Study", Industrial Engineering Review, Aligarh. U P INDIA, 1993
Working Papers
Haleem A, Kanda A, Sushil (1996), "Integrating Physical System Theory with System Dynamics Using Statistical Link Model".
Haleem A, Kanda Arun, Sushil, (1997)," Modeling of Inter-sectoral Relationships for Analysis of Flows and Costs in Indian Economy".
Haleem A, Sushil, Arun Kanda, (2000)," Development of Policy Model of Indian Iron and Steel Industry"
Haleem Abid, Afzal S. M., Zaheeruddin (2001), "Effective Cost Management" .
Haleem Abid, (2006),Bullwhip Effect: A Brief Review
PROFESSIONAL ACTIVITIES
Consultant, Educational Consultants, India.
Member, Governing Council, Global Institute of Flexible Systems Management (GIFT) Involved in Publication of Flexibility, and organizing Seminar series, Global Conferences, workshops on the theme and allied areas of Flexibility.
Life Member, Indian Society of Mechanical Engineering
Life Member, Indian Islamic Cultural Center, New Delhi
Life Member, Indian Society for Technical Education.
Secretary, GIFT School of Learning Organization and Strategic Transformation, at New Delhi since August 2003.to 2005
Director, Global School of Technology Management and Innovation
Secretary, ISTE Jamia Chapter, New Delhi Since 2004
CONTRIBUTION TO TEACHING/ ACADEMIC ENVIRONMENT AND INSTITUTIONAL CORPORATE LIFE:
Organized, National Conference on Emerging Trends in Technology Management, Mathura, 2006,
Delivered Extension lecture, at Academic Staff College, Jamia Millia Islamia, on Challenges in E-Government, April, 2006
Organized International Conference "Third Global Conference on Flexible Systems Management", Theme: Technology Transfer, Innovation and Flexibility for Reshaping the world... at Faculty of Engineering and Technology, Jamia Millia Islamia, New Delhi- India.. from 12-15 March, 2004
Delivered Extension lecture, at Faculty of Business and Agriculture Studies, Aligarh Muslim University, Aligarh," E- Governance & Government : Initiatives and Challenges", 24th March 2004.
Delivered Extension lecture, at Academic Staff College, Jamia Millia Islamia, on E-Governance, May 2004
Delivered Keynote address, at Sankara College of Engg & Tech , Jaipur, on power scenario ,Oct 2004
Worked for the establishment of Center for Management Studies at Jamia Millia Islamia
Member Development, IT Evaluation, IT need assessment, Accreditation, Convocation and other Committees of Jamia Millia Islamia,
Conceptualization, design, development and maintenance of MBA (part-time) Program website www.jmimbae.org
Delivered Extension lecture, at Milwaukee School of Engineering, Milwaukee at Wisconsin, USA,"SWOT Analysis of Rockwell Automation’s Industrial Automation Business", 5th, August 2001.
Editor, E-Mat, Electronic Newsletter of MBA Program, at Jamia Millia Islamia, New Delhi, since 2001
Undergone advanced training in the area of Industrial Automation at Milwaukee School of Engineering, and the research and development facilities of Rockwell Automation at Milwaukee and Mequen, USA.
Delivered Extension Lecture at Academic Staff College at JMI," Role of IT in Business Transformation: A comparison of USA and India. June 2001.
Co-ordinator M.B.A. (evening) Program, associated with this program from inception,. effectively in running this program through syllabus design and updation, faculty arrangement, day to day administration, drafting examination and other regulation, maintaining rapport with other institution, industry, faculty and the students.
Coordinator B.E. (Mechanical) during the session 1997 and 1998.
Coordinator Training and Placement", Department of Mechanical Engineering, 1990
Developed Workshop, Industrial Engineering Laboratory, Material Science laborartoey, Ergonomics Laboratory at Department of Mechanical Engineering.
Conducted Entrepreneurship Awareness Camp in 1988.
Designed Syllabi of B.E. (Mechanical), B Tech (Mechanical), M Tech (Mechanical), M Tech (Industrial and Production), and M.B.A. for Jamia Millia Islamia, IGNOU, G B Pant University, and various other universities, engineering and management institutions.
Delivered extension lectures for teaching staff and students .at various institution, universities and colleges.
Member of the Committee responsible for establishing "Central Computer Facility" in the Faculty of Engineering
Workshop Superintendent Faculty of Engineering , JMI.
Member flying squad-Jamia University Examination 1998.
Instrumental in developing Materials Science Laboratory in the Mechanical Engineering Department.
Member of AICTE Expert Committee for approval of MBA and engineering courses since 2001
Member of National Accreditation Board of AICTE for grading of Mechanical engineering department and management department .
Expert for various selection committee for professors, readers and lecturers in Management , Business Economics, Mechanical engineering.
Member of Faculty Committee, Moderation Committee for B.E., B. Tech. and MBA Program of Jamia, IGNOU, AMU and other Institutions.
Member of Research Board at various institutions.
Center Superintendent for B.E, B Tech, M.B.A etc entrance examination
Academic Council nominee for selection committee at AMU Aligarh.
Member of Board of Studies at different department of Jamia Millia Islamia, Aligarh Muslim University, etc
Faculty Committee Members (as Management Expert and Engineering Expert) at Jamia and AMU.
Latest International Conferences and Seminars Attended:
"E-Governance: Issues Involved", International Conference on Management of Research and Development, (ICMARD 2003). 10-11th January 2003, IIT Delhi, New Delhi, 2003.
"Globalization Of Research And Development: Software Sector in India", International Conference on Management of Research and Development (ICMARD 2003) 10-11th January 2003, IIT Delhi, New Delhi, 2003
Abid Haleem, (2003), "National Seminar on Trade in Education Services Under WTO Regime", Presented at All India Council for Technical Education (AICTE), 5th and 6th May, 2003 New Delhi-110016.
Global Corporate Convention (2002), "Corporate Ethics and Governance" Organized by National Foundation of Indian Engineers (NAFEN), on 17-18th September, at Maura Sheraton, New Delhi
Agrawal, Vijay K, Abid Haleem, Sushil, (2002), "Successful Implementation of Business Process Engineering and Computer based Information Systems", Presented at National Technology and Social Science Conference organized by National Social Science Association at Hills lake, Dr. Las Vegas, 10th – 12th April, 2002 USA.
Agrawal, Vijay K, Abid Haleem, Sushil, (2002), "The Contribution of Information Technology to Critical Response Activities in Business Transformations", Presented at National Technology and Social Science Conference organized by National Social Science Association at Hills lake Dr. Las Vegas, 10th to 12th April, 2002, USA.
AWARDS
Received Gold Medal for securing maximum marks and First Position in M. Sc. Engineering, 1987, AMU, Aligarh. India
Awarded sponsorship and represented India, at Global Development Program 2001, at M S O E, Wisconsin, and USA by Rockwell Automation.
